Energy Saving with Smart Inverter Control
Smart Inverter Technology eliminates wasted operation by efficiently controlling energy use.
-
Auto Restart
When a washing machine is turned off due to power failure, it will restart automatically from the position it stopped to adjust accordingly.
-
Standby Power Save
Even if the power cord is plugged in while power is off, only extremely little electricity will run through the washer. You don’t need to worry about wasted electricity.
Smart Motion
Smart Motion is 3 kinds of motions created by Smart Inverter for optimized washing by fabric type. Enjoy better combination for better care.
TurboDrum™
TurboDrum™ enables the most powerful wash and removes the toughest dirt through strong water stream of rotating drum and pulsator in the opposite direction.
Punch+3
Punch+3 creates powerful streams of water which mix laundry up and down repeatedly for even washing result.
Auto Pre Wash
With one touch, tough stains are ready to be gone. Let your hands free, let your washing machine do the laundry.
Side Waterfall
Side Waterfall enables the best mixing of detergent with water while minimizing detergent residue that can cause skin irritation and allergy.
LoDecibel™ & Less Vibration
Smart Inverter Motor minimizes noise and vibration level. Plus more durability and 10 year motor warranty.
Smart Diagnosis™
Smart Diagnosis™ helps diagnose and troubleshoot mechanical issues, limiting costly and inconvenient service visits.
FAQ
- Q.
Why is my laundry covered with dust and lint?
-
A.
1. Dust generated during washing is filtered through a cleaning filter. If the cleaning filter is full, the dust may not be filtered out properly. The cleaning filter can be manually cleaned before every wash to prevent the machine from leaving dust and lint on clothes.
2. Separate your colored and white clothes from your black and lint-producing clothes. Wash them in different loads to further prevent unwanted dust and lint in your laundry.
- Q.
[IE] What should I do when I encounter this error?
-
A.
1. It occurs when the washing container is not filled with water for a certain period of time.
2. Check if the faucet is locked or the water hose is not connected.
3. Check if the water supply hose is pressed or bent.
4. Please check if the water supply hose is frozen because of the cold weather.
- Q.
[OE] What should I do when I encounter this error?
-
A.
1. If the drain hose is twisted or bent, or if the drain hose is installed too high, the water flow may be interrupted and the water may not drain well. In this case, make sure that the drain hose is not more than 6 cm off of the floor and arrange it so that the bottom of the hose falls evenly, without obstruction.
2. Make sure that the drain hose is not blocked with dust or other substances.
3. Check if the drain hose has frozen due to cold weather.
- Q.
[dE] What should I do when I encounter this error?
-
A.
If the valve where the source water is supplied or the dispense valve of the faucet is closed, the water pipe sterilization and water outlet sterilization features will not work. Please open the source water valve or the dispense valve.
- Q.
How do I register my ThinQ products?
-
A.
1. Make sure that both your product and internet router are turned on.
2. Bring your product close to the internet router. If the distance between the product and the router is too far, the signal strength can be weak and it may take a long time to register your product.
3. Install the ThinQ application. Please refer to the page relevant to your country for further instructions on installing the ThinQ application and registering your product.
Summary
-
- Max Wash Capacity(kg)
- 13
-
- Product Dimensions (WxHxD mm)
- 590 x 960 x 606
-
- KEY FEATURE #1
- Smart Inverter Control
-
- KEY FEATURE #2
- TurboDrum™
1,117 EGP / 12 month
Reviews
There are no reviews yet.